Oakley is an HP-built, Intel® Xeon® processor-based supercomputer, featuring more cores (8,328) on half as many nodes (694) as the center’s former flagshipsystem, the IBM Opteron 1350 Glenn Cluster. The Oakley Cluster can achieve 88 teraflops, tech-speak for performing 88 trillion floating point operations per second, or, with acceleration from 128 NVIDIA® Tesla graphic processing units (GPUs), a total peak performance of just over 154 teraflops.



Photo: OSC Oakley HP Intel Xeon ClusterDetailed system specifications:

  • 8,328 total cores
    • 12 cores/node  & 48 gigabytes of memory/node
  • Intel Xeon x5650 CPUs
  • HP SL390 G7 Nodes
  • 128 NVIDIA Tesla M2070 GPUs
  • 873 GB of local disk space in '/tmp'
  • QDR IB Interconnect
    • Low latency
    • High throughput
    • High quality-of-service.
  • Theoretical system peak performance
    • 88.6 teraflops
  • GPU acceleration
    • Additional 65.5 teraflops
  • Total peak performance
    • 154.1 teraflops
  • Memory Increase
    • Increases memory from 2.5 gigabytes per core to 4.0 gigabytes per core.
  • Storage Expansion
    • Adds 600 terabytes of DataDirect Networks Lustre storage for a total of nearly two petabytes of available disk storage.
  • System Efficiency
    • 1.5x the performance of former system at just 60 percent of current power consumption.

How to Connect

To connect to Oakley, ssh to oakley.osc.edu.

Batch Specifics

Refer to the documentation for our batch environment to understand how to use PBS on OSC hardware. Some specifics you will need to know to create well-formed batch scripts:

  • Compute nodes on Oakley are 12 cores/processors per node (ppn). Parallel jobs must use ppn=12 .
  • If you need more than 48 GB of RAM per node, you may run on the 8 large memory (192 GB) nodes  on Oakley ("bigmem"). You can request a large memory node on Oakley by using the following directive in your batch script: nodes=XX:ppn=12:bigmem , where XX can be 1-8.

  • We have a single huge memory node ("hugemem"), with 1 TB of RAM and 32 cores. You can schedule this node by adding the following directive to your batch script: #PBS -l nodes=1:ppn=32 . This node is only for serial jobs, and can only have one job running on it at a time, so you must request the entire node to be scheduled on it. In addition, there is a walltime limit of 48 hours for jobs on this node.
Requesting less than 32 cores but a memory requirement greater than 192 GB will not schedule the 1 TB node! Just request nodes=1:ppn=32 with a walltime of 48 hours or less, and the scheduler will put you on the 1 TB node.
  • GPU jobs may request any number of cores and either 1 or 2 GPUs.

Using OSC Resources

For more information about how to use OSC resources, please see our guide on batch processing at OSC. For specific information about modules and file storage, please see the Batch Execution Environment page.


Oakley Changelog

Oct 2 2015 - 2:38pm

Gromacs 5.1 has been installed on Oakley; usage is via the module gromacs/5.1. For information on available executables and installation details see the software page for Gromacs or the output of the respective module help command, e.g.: module help gromacs/5.1.

Sep 29 2015 - 10:43am

The OSCMatlabPCT, the package used for configuring and submitting parallel MATLAB jobs, was updated on Sep. 17, 2015. This is because after Downtime two config files cannot be recognized (format error) by clusters. 

Sep 29 2015 - 8:46am

The cuda/4.1.28 module was removed from Oakley during the software update.  It has been restored because it is required for amber/11.

Sep 28 2015 - 1:33pm

matlab version r2015a and r2015b have been installed on oakley and ruby.