The data transfer speed between OSC and another network can be tested.
Connect to a data mover host at osc and note the hostname.
$ ssh sftp.osc.edu # login $ hostname datamover02.hpc.osc.edu # the hostname may also be datamover01.hpc.osc.edu
From there, an iperf3 server process can be started. Note the port used.
iperf3 -s -p 5201 Server listening on 5201 # the above port number could be different
Next, on your local machine, try to connect to the iperf3 server process
iperf3 -c datamover02.hpc.osc.edu -p 5201
If it connects sucessfully, then it will start testing and then finish with a summary
Connecting to host datamover02.hpc.osc.edu, port 5201 ... - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 7] 0.00-10.00 sec 13.8 MBytes 11.6 Mbits/sec sender [ 7] 0.00-10.00 sec 13.8 MBytes 11.6 Mbits/sec receiver
For the data downloaded speed, you can also test the newwork performace in the reverse direction, with the server on datamover02 sending data, and the client on your computer receiving data:
iperf3 -c datamover02.hpc.osc.edu -p 5201 -R
Docker can be used if iperf3 is not installed on client machine, but docker is.
$ docker run --rm -it networkstatic/iperf3 -c datamover02.hpc.osc.edu -p 5201